Morteza Shafiei
Ph.D. Candidate & University Instructor · Geotechnical Engineering
- Department of Civil & Environmental Engineering
- University of Massachusetts Amherst
- Amherst, MA 01003, USA
- mshafiei [at] umass [dot] edu
- mortezaashafiei [at] gmail [dot] com
- www.mortezashafiei.com
- ORCID 0000-0002-1186-706X
Research interests
Degradation and behavior of crushable glauconite sands · offshore wind foundations and site investigation · in-situ testing (CPTu) · pile setup and deep-foundation mechanics · calibration-chamber physical modeling · particle morphology.
Education
Ph.D., Civil & Environmental Engineering (Geotechnical Engineering)
2021 – present University of Massachusetts Amherst, Amherst, MAPh.D. candidate. Advisers: Prof. Don J. DeGroot, Sc.D., P.E., and Prof. Zachary J. Westgate, Ph.D., P.E. Research: degradation and behavior of glauconite sand for offshore wind foundations.
M.Sc., Civil & Geotechnical Engineering
2015 – 2018 Amirkabir University of Technology (Tehran Polytechnic)Adviser: Prof. Kazem Fakharian. Graduated with highest academic honors. Designed and operated a large-scale pressurized consolidation chamber for physical modeling of deep foundations.
B.Sc., Civil Engineering
2010 – 2015 University of TabrizSolid mechanics, structural analysis, foundation engineering, and experimental soil mechanics.
Professional development
Cone Penetration Testing for Geotechnical Applications
Oct 2025 ConeTec & Menard · Waltham, MAPresented by Dr. Peter Robertson, Kelly Cabal, Eric Rundstrom, and Jorge Fuentes. 7.0 Professional Development Hours (Professional Engineering & Geology), accredited by The Practicing Institute of Engineering.
Peer-reviewed journal publications
- Westgate, Z. J., Senanayake, A., Shafiei, M., & DeGroot, D. J. (2026). Mitigation of CPT thrust force through glauconite sand. Canadian Geotechnical Journal, 63, 1–8. doi:10.1139/cgj-2026-0117
- Kaviani-Hamedani, F., Esmailzade, M., Adineh, K., Shafiei, M., & Shirkavand, D. (2024). Quantifying three-dimensional sphericity indices of irregular fine particles from 2D images through sequential sieving tests. Granular Matter, 26(1), Article 13. doi:10.1007/s10035-023-01376-1
- Fakharian, K., Shafiei, M., & Hafezan, S. (2023). Investigation of soil setup effects on pile response in clay considering overconsolidation ratio and installation method through physical modeling. Canadian Geotechnical Journal, 60(4), 488–503. doi:10.1139/cgj-2021-0686
Conference papers & presentations
- Shafiei, M., Jaffé, D., Westgate, Z. J., & DeGroot, D. J. (submitted). Effect of particle degradation mechanisms on glauconite sand behavior. ASCE Geo-Congress 2027 (abstract accepted).
- Shafiei, M., Guo, D., DeGroot, D. J., & Westgate, Z. J. (2026). Effect of laboratory-induced degradation on the plasticity of authigenic glauconite sands [Poster]. Tufts 4th Annual Symposium in Geotechnical Engineering, Tufts University, Medford, MA, February 7, 2026.
- Shafiei, M., & Fakharian, K. (2018). Effect of installation method and pile type on soil setup using consolidation chamber physical modeling. M.Sc. thesis and conference proceedings, Amirkabir University of Technology.
Honors & recognition
ARROW Student Spotlight
Nov 2025 ARROW — Academic Center for Reliability & Resilience of Offshore WindFeatured for research on the mechanical behavior of offshore and onshore glauconite sand.
Student Highlight, ARROW 2025 Annual Report
2025Recognized for evaluating the degradation of glauconite sand under static and cyclic loading.
M.Sc. with highest academic honors
2018 Amirkabir University of Technology (Tehran Polytechnic)Teaching, research & mentoring
University Instructor
Department of Civil & Environmental Engineering, University of Massachusetts AmherstLead laboratory and course instructor for undergraduate engineering mechanics and geotechnical engineering courses.
Graduate Research Assistant · ARROW student researcher
Offshore Geotechnics & Foundation Mechanics Group, University of Massachusetts AmherstLaboratory and field research on glauconite sand for offshore wind foundations, including field CPTu testing within the Piling in Glauconitic Sand (PIGS) Joint Industry Project.
Undergraduate research mentoring
Geotechnical laboratory, University of Massachusetts AmherstWorks with undergraduate researchers on glauconite degradation testing (undergraduate co-author on the Geo-Congress 2027 paper).
Selected research projects
Particle degradation of glauconite sand (Ph.D.)
- Hornerstown and Navesink glauconite sands (New Jersey) degraded by 1D compression to 50 MPa, ball milling, and dispersion-cup mixing, matched to the stress zones around a driven pile.
- Showed that particle-size classification alone is insufficient: free water and stress regime control the plasticity of the fines produced.
CPTu thrust reduction in glauconite sand (PIGS Joint Industry Project)
- Field comparison of cone size, friction-reducer length, diameter and number, and water jetting at a New Jersey site.
- A larger 15 cm² cone, a larger-diameter reducer, and upper-bevel water jetting significantly reduced thrust (layer-specific); longer or multiple standard reducers did not.
Pile setup in clay by calibration-chamber modeling (M.Sc.)
- 400 mm × 1000 mm consolidation chamber; CPT-size model pile with three strain gauges and three pore-pressure transducers; kaolinite at OCR 1.2 and 4.8; static load tests from 1 hour to 90 days.
- Driven piles set up faster and reached greater long-term shaft friction than jacked-in piles; setup separated into pore-pressure dissipation and aging components.
3D particle sphericity from 2D images
- Sequential sieving and X-ray micro-CT (3,000+ particles per material) linking 2D shape indices to 3D sphericity and Zingg flatness and elongation ratios.
Technical skills
- Testing
- Field CPTu; calibration-chamber modeling; high-pressure oedometer; ball milling (LA abrasion); dispersion-cup degradation; hydrometer and sieve analysis; fall-cone Atterberg limits; X-ray micro-CT and SEM image analysis
- Standards
- ASTM D5778, D1143, D6913, D7928, D2435, D2487; ISO 17892-12; API RP 2GEO; ISO 19901-8
- Instrumentation
- Pore-pressure transducers, strain gauges, load cells, LVDTs; sensor calibration and signal conditioning
- Software
- PLAXIS 2D & 3D, FLAC, GeoStudio, Python (NumPy, SciPy, pandas), MATLAB, ImageJ, gINT, CPT-Pro
Updated November 2026 · www.mortezashafiei.com